The walls of this house are a combination of double brick and reverse brick veneer.
Brick and block cavity wall construction.
Brick cavity walls flashing joints mortar ties weep holes workmanship.
However one should know how they are constructed and why.
In general cavity wall doesn t require any footings under it just a strong concrete base is provided on which cavity wall is constructed centrally.
Set each wall tie a minimum of 50mm into both masonry leaves.
Cavity wall construction as the name implies a cavity wall comprises an inner and outer wall often referred to as leafs.
Two leaves are constructed like normal masonry but minimum cavity must be provided in between them.
As a result of the long history of building with cavity brick brick veneer and concrete blockwork in australia there is a huge body of knowledge and experience on standards and techniques for these construction systems.
A cavity wall is a wall formed by an inner skin and an outer skin of masonry sometimes referred to as leaves or wythes if they are a single unit wide connected by ties but separated by a cavity.
The inner wall may be constructed of masonry units such as concrete block structural clay brick or reinforced concrete.
The dimensions in the table below represent the level that can be reasonably achieved for general brick and block work masonry.
The ties strengthen the cavity wall.
Keep the cavity and or insulation clear of any mortar droppings.
Brick and block houses use a cavity wall construction with an internal and external skin of brickwork with a gap between them more often than not filled with insulation held together with wall ties all laid on to concrete foundations.
The use of cavity walls is common in cold countries.
Devoted to brick masonry cavity walls covers good construction practices.
These two walls are fastened together with metal ties or bonding blocks.
And for one brick thickness or more thickness english bond.
Construction of cavity walls.
A cavity wall is composed of two masonry walls separated by an air space.
The outer wall is made of brick and faces the outside of the building structure.
Since air is a bad conductor of heat a cavity wall decreases the heat transmission considerably hence.
The normal 275 mm 11 inches cavity wall which is suitable for buildings not exceeding two stories in height consists of two half brick 4 1 2 inch walls with 2 inches cavity.
These are separated by a cavity that is typically 100mm to 150mm which is spanned by ties connecting both leafs.
The masonry is formed by units such as brick stone or block.
The cavity prevents the transfer of moisture from the outer to inner leaf and also provides space.
Cavity walls hollow space cavity wall and cavity wall insulation advantages of cavity wall construction.
Wall ties flashing and weep holes keeping the cavity clean and protecting the wall from weather during construction.
Cavity wall checks the prevention of dampness from outside to inside of the building in the better way than a solid brick wall of the same thickness.
Guide for horizontal and vertical alignment of masonry walls.