Mohawk is a leading carpet manufacturer.
Carpet density 60.
Others have carbon composite nylon filaments woven into the yarn that eliminate shocks.
Density x pile height 36 face weight e g 2160 x 0 50 36 30 in this example what we know is that the pile density is 2160 and the pile height is 0 5 one half inch.
Find the perfect home carpet.
Carpet rule 3.
You want a carpet density with a density of 2 900 for good durability and i d be cautious with anything less than 2 500 in moderate traffic rooms.
What density carpet do i need.
What does carpet density tell.
The quality of carpet pad is determined by density not thickness.
Simply put carpet density numbers refer to how close together the fibers of your carpet are tufted into the backing.
When you calculate carpet density you ll obtain a 4 digit number.
Nylon accounts for nearly 60 percent of carpet sales.
Is there a noticeable difference when comparing 40 vs.
60 loop carpet in their appearance.
Carpet face weight is defined as the weight of the carpet pile per square yard of carpet measured in ounces.
A good quality pad will be 3 8 to 1 2 in.
The wrong pad can cut the life of your carpet in half.
The right pad will extend the life of your carpet.
Let s try an example.
As an example if you take carpet with a 60 oz face weight and a 75 inch pile height it s density will be 2 880 ounces per cubic yard 60 x 36 75 2880.
When buying a carpet to use in typical home environments you ll want to see a density value of at least 3 600.
A carpet density rating is one of the factors that determine how well your carpeting will perform.
Density is often misconceived as a carpet s face weight but these two terms are completely different.
Thick and have a density weight rating of at least 6 lbs.
Density is the best specification to determine durability.
36 density x face weight pile height.
What is a minimum carpet density value to look for when buying a carpet.
The density of a carpet is one of many factors that determine a carpet s quality and overall performance.
If you buy a carpet with a face weight of 60 ounces and a 1 2 inch pile height you ll multiply 60 x 36 to obtain 2160 and then multiply that by 1 2 or 5 to obtain a carpet density of 1080 ounces in each cubic yard.
Some of these enhanced nylons cost as much as wool.
Face weight does come into play when you are calculating density however.
Despite a common misconception carpet density and carpet face weight are not interchangeable terms that mean the same thing although face weight is one factor used to calculate density.
Face weight and density are two entirely different components when it comes to evaluating the.
The term refers to the weight of the carpet s fibers only not the backing material.
It should not be confused with the carpet s total weight which is the combined weight of the pile plus the backing.
Some new offerings feature added wear and stain resistance.
Carpet rule 2.